Coleman 800ATV-2, Owner'S Manual, Page: 68 / 203

Operation 6-5
NOTE:
When in reverse, the reverse indicator light
in the display panel should be on. If the
light does not come on, have a dealer
inspect the electrical circuits.
Due to the synchronizing mechanism in the
engine, the light may not come on until the
ATV starts moving
4. Check to the rear for people or
obstacles, and then release the brake
pedal.
5. Apply the throttle lever gradually and
continue to watch to the rear while
backing.
WARNING
POTENTIAL HAZARD
Improperly operating in reverse.
WHAT CAN HAPPEN
You could hit an obstacle or person behind
you, resulting in serious injury.
HOW TO AVOID THE HAZARD
When you shift into reverse, make sure there
are no obstacles or people behind you. When
it is safe to proceed, go slowly.
Shifting between 2WD and 4WD
The gray button on the “2WD/4WD”
selector switch will switch the ATV from 2
Wheel Drive (when the button is out) to 4
Wheel Drive (when the button is in).