Coleman 800ATV-2, Owner'S Manual, Page: 119 / 203

8-12 Periodic Maintenance and Adjustment
9. Start the engine and warm it up for several
minutes. While warming up, check for oil
leaks. If oil leaks are found, turn the engine
off immediately and check for the source.
10. Turn the engine off, and then check the
oil level and fill it if necessary.
Final gear oil
The final gear case must be checked for oil
leaks before each ride. If any leaks are found,
have a dealer check and repair the ATV.
Replacing the final gear oil
1. Place the ATV on a level surface.
2. Place a container under the final gear case
to collect the used oil.
3. Remove the oil filler bolt and the drain bolt
to drain the oil.
1. Final gear oil filler bolt
1. Final gear oil drain bolt