Coleman 800ATV-2, Owner'S Manual

Page: 36 / 203

Control Functions 4-9
NOTE:
See starting instructions prior to starting the
engine. (See P6-1
—
6-2)
Turn signal switch
Moving the turn signal switch left or right, the
turn signal will blink correspondingly. A buzzer
will also sound.
Engine emergency stop switch
“
/
”
Make sure that the engine emergency stop
switch is set to
“ ”
before starting the
engine. The engine stop switch controls
ignition and can be used at all times to stop
the engine, especially in an emergency. The
engine will not start or run when the
emergency stop switch is set to
“ ”
.
Horn button
Press this button. The horn will sound.
Emergency flasher button
Press this button. The four turn signal lights
will flash continuously. At the same time a
buzzer will sound.
2WD/4WD operation
This ATV should be ridden off road. This drive
system provides the ATV engine more power
and better performance in off road conditions.
Differential
This ATV has an EC certificate; therefore it
can be used on public streets, roads, and
highways, where legal. This ATV is equiped