Coleman 800ATV-2, Owner'S Manual

Page: 66 / 203

Operation 6-3
3. Turn the ignition switch/key to “OFF”.
When turning off the ignition switch there is
a three minute run time for the fan to
continue to cool and prevent the coolant
from boiling. The fan will then automatically
shut off.
Drive Select Lever Operation and
Reverse Driving
CAUTION:
Before shifting, you must stop the ATV,
release the throttle lever, then allow the
engine to return to idle; otherwise the
transmission may be damaged.
Shifting:
Neutral to High and High to Low
1. Bring the ATV to a complete stop and
allow the throttle lever to return to idle.
Wait for the engine to idle at 1400 rpm.
2. Once the engine idle is below 1400 rpm,
apply the brakes, and shift by depressing
the button on the left side of the gearshift
handle and then move the gear shift lever
along the shift guide.
3. Apply the throttle lever gradually.
NOTE:
Make sure that the gear shift lever is
completely shifted into the desired position
before applying throttle.