Coleman 800ATV-2, Owner'S Manual

Page: 128 / 203

Periodic Maintenance and Adjustment 8-21
Spark plug gap: .032 - .035 in.
(0.8-0.9 mm)
a. Spark plug gap
2. Clean the gasket surface.
3. Install the spark plug and tighten it to the
specified torque.
Tightening torque:
Spark plug:
13 ft·lbf (1.75m·kgf, 17.5 Nm)
NOTE:
If a torque wrench is not available when you
are installing a spark plug, a good estimate of
the correct torque is 1/4 to 1/2 turn past
finger tight. Have the spark plug tightened to
the specified torque as soon as possible.
4. Replace the spark plug cap.
Air filter element cleaning
NOTE:
There is a check hose at the bottom of the air
filter case. If dust or water collects in this
hose, empty the hose and clean the air filter
element and air filter case.