Cold Jet 514635, User Manual

Page: 43 / 105

Industrivej 62
DK-6740 Bramming
Denmark
Original
Revision: 2.0
IceTech R1000H
Procedures for Maintenance and Repair
Page:
3-10 of
32
Date: 24.08.18
Init: JM
7.
Install the new compression piston by sliding it back then lifting it up into place over the cylinder rod.
8.
Install the two compression piston bolts with wedge lock washers and tighten to 5 ft.-lbs (6.8 N-m).
9.
Install the new rear back chamber piece then the 2 chamber side plates.
10.
Install the new eject piston.
11.
Install the new front chamber piece.
12.
Close the front block door.
13.
Install the taper pin by tapping downward with a rubber mallet until the pin protrudes out the bottom of
the chamber walls.