Cold Jet 514635, User Manual

Page: 40 / 105

Industrivej 62
DK-6740 Bramming
Denmark
Original
Revision: 2.0
IceTech R1000H
Procedures for Maintenance and Repair
Page: 3-7 of 32
Date: 24.08.18
Init: JM
3. PROCEDURES FOR TOOL SET REPLACEMENT
Changing the Compression Piston
There are two options for changing the compression piston: single slice and multi slice . Please follow
the instructions that correspond with your machine.
Single Slice
Before you begin this procedure, ensure you have the following tools:

adjustable wrench or 24mm open-ended wrench

rubber mallet

6 and 8 mm Allen wrench
To change the compression piston:
1.
Remove the taper pin.

Remove the taper pin by turning the nut until the pin extends and can be pulled out manually, or
use a rubber mallet to tap the pin upward from the bottom until the pin extends and can be pulled
out manually.
2.
Open the front block door.

The door opens to the right.
Taper Pin
Front
Block
Door