Industrivej 62
DK-6740 Bramming
Denmark
Original
IceTech R1000H
Operator Manual for Reformer
Version:
1.0
Page:
12 from
23
Date:
30.08.17
Init.:
JM
MACHINE OPERATION START-UP
1.
MAINS
Turn the MAIN SWITCH on and wait for the HMI
to boot.
2. Reset alarms
Open the alarm page and press the reset button to
reset alarms. If alarms cannot be reset use
troubleshooting in the alarms section in the technical
file.
3. Automatic mode
To start production on the R1000H reformer, the
machine must be in an a utomatic mode.
Summary of Contents for 514635
