Club Car Carryall XRT 1550, Maintenance And Service Manual

Page: 407 / 432

HYDRAULIC ATTACHMENT SYSTEM Angle Frame Bushings
19
1
2
2291
Figure 19-75 Remove Bushings from Rod End
2292
Figure 19-76 Apply LOCTITE and Install Bushings Into
Rod End
ANGLE FRAME BUSHINGS
SNOW BLADE ANGLE FRAME
Removal and Installation
WARNING
• Wear safety glasses to prevent eye injury when any of the following conditions exist:
– Fluids are under pressure.
– Flying debris or loose material is present.
– Engine is running.
– Tools are being used.
1. Remove bushings (1) (Figure 19-77, Page 19-38) from both sides of angle frame.
2. Apply LOCTITE 271 (Red) to the bushings before installing them into the frame.
3. Install bushings (2) (Figure 19-78, Page 19-38) on both sides of the angle frame.
2013 Carryall 295/XRT 1550 Maintenance and Service Manual Page 19-37