Club Car Carryall XRT 1550, Maintenance And Service Manual

Page: 263 / 432

ELECTRICAL COMPONENTS: DIESEL VEHICLES Oil Pressure Sensor
14
OIL PRESSURE SENSOR
See General Warnings, Section 1, Page 1-2.
Refer to the engine manual for testing, removal, disassembly, and installation procedures. See the Kubota
D722 diesel engine manual (CC P/N 103840201).
HEADLIGHTS
See General Warnings, Section 1, Page 1-2.
TESTING THE HEADLIGHT BULB AND SOCKET
See Test Procedure 35 – Voltage at Headlight Socket on page 12-40. See also Test Procedure 34 – Light
Switch on page 12-39.
HEADLIGHT BULB REMOVAL
1. Disconnect battery. See Disconnecting the Battery – Gasoline/Diesel Vehicles, Section 1, Page 1-3.
2. From the front of the vehicle, reach under the cowl and turn the connector harness/halogen bulb assembly
clockwise one-quarter turn
(Figure 14-15, Page 14-17) .
3. Remove the connector harness/halogen bulb assembly from the headlight lens (1).
4. Lift the retaining tabs on the connector (3) and remove the halogen bulb (2).
1
2
3
1165
Figure 14-15 Headlight Bulb
HEADLIGHT BULB INSTALLATION
NOTE: When handling halogen bulbs, do not touch the glass portion of bulb. Oil from finger tips can cause premature
failure of the bulb.
2013 Carryall 295/XRT 1550 Maintenance and Service Manual Page 14-17