Club Car Carryall XRT 1550, Maintenance And Service Manual

Page: 231 / 432

ELECTRICAL COMPONENTS: GASOLINE
VEHICLES Fuel Gauge/Hour Meter
13
11
6
13
12
8
7
1
10
2
3
9
2131
Figure 13-6 Instrument Panel Electrical Components
FUEL GAUGE/HOUR METER
See General Warnings, Section 1, Page 1-2.
TESTING THE FUEL GAUGE/HOUR METER
See Test Procedure 31 – Fuel Gauge on page 11-32. Also see Test Procedure 32 – Hour Meter on page 11-33.
With the key switch in the OFF position, the fuel gauge field is blank; however, the hour meter field is always ON.
When the key switch is turned to ON, the fuel gauge field activates. The fuel gauge initially registers full before
indicating the actual fuel level.
The hour meter displays the number of hours of use in increments of 0.1 (one tenth) hour, but does not record additional
time unless the key switch is in the ON position and the engine is on. When recording, the hourglass icon blinks.
FUEL GAUGE/HOUR METER REMOVAL
1. Disconnect battery and spark plug wire(s). See Disconnecting the Battery – Gasoline/Diesel Vehicles on
page 1-3.
2. Raise the hood.
3. Disconnect the wires from the fuel gauge/hour meter (2) (Figure 13-6, Page 13-7) .
4. Remove the mounting clip (3) that secures the gauge/meter. Alternate pulling the lower and upper tabs away from
the gauge housing to remove clip. Pull gauge/meter from the instrument panel.
2013 Carryall 295/XRT 1550 Maintenance and Service Manual Page 13-7