Club Car Carryall XRT 1550, Maintenance And Service Manual

Page: 299 / 432

GASOLINE ENGINE, MUFFLER, FUEL SYSTEM,
AND CLUTCHES Air Intake System
15
Air Filter Installation
1. Push the new filter cartridge onto the nozzle inside the canister.
2. Position the canister cap so the TOP mark is at the top center of the canister (Figure 15-22, Page 15-26) .
3. Use both tab locks on the sides of the cap to secure the canister cap.
AIR CANISTER REMOVAL
1. Disconnect battery and spark plug wire(s). See Disconnecting the Battery – Gasoline/Diesel Vehicles on
page 1-3.
2. Remove the air filter cartridge. See Air Filter Removal on page 15-26.
3. Remove the bottom (inlet) hose from the canister.
4. Remove the top (outlet) hose from the canister.
5. Remove the two bolts and park brake cable from the canister and remove the canister.
2041
Figure 15-23 Air Filter Canister
AIR CANISTER INSTALLATION
1. Position the canister next to the frame bracket with the rubber valve down.
2. Install two bolts to secure the canister base bracket and vehicle frame bracket. Tighten the hardware to 21 ft-lb
(28.5 N·m).
3. Secure the bottom (inlet) hose to the canister port.
4. Secure the top (outlet) hose to the canister port.
5. Install a new air filter cartridge. See Air Filter Installation on page 15-27.
6. Connect battery and spark plug wire(s). See Connecting the Battery – Gasoline/Diesel Vehicles, Section
1, Page 1-4.
2013 Carryall 295/XRT 1550 Maintenance and Service Manual Page 15-27