Club Car Carryall XRT 1550, Maintenance And Service Manual

Page: 236 / 432

13
Reverse Warning Buzzer (If Equipped)
ELECTRICAL COMPONENTS: GASO-
LINE VEHICLES
WARNING
• If a fuse is blown, determine the cause of the failure and make necessary repairs before installing a
new fuse. Use the appropriately rated fuse; if a fuse with a higher amp rating is used, damage to the
vehicle electrical system may occur.
2. Install the electrical component cover.
3. Connect battery and spark plug wire(s). See Connecting the Battery – Gasoline/Diesel Vehicles, Section
1, Page 1-4.
REVERSE WARNING BUZZER (IF EQUIPPED)
See General Warnings, Section 1, Page 1-2.
TESTING THE REVERSE WARNING BUZZER
See Test Procedure 26 – Reverse Warning Buzzer (If Equipped) on page 11-29.
REVERSE WARNING BUZZER REMOVAL
1. Disconnect battery and spark plug wire(s). See Disconnecting the Battery – Gasoline/Diesel Vehicles on
page 1-3.
2. Raise the hood.
3. Remove the plastic rivets securing the reverse warning buzzer and remove the reverse warning buzzer (Figure
13-7, Page 13-12) .
2098
Figure 13-7 Reverse Warning Buzzer and Limit Switch
REVERSE WARNING BUZZER INSTALLATION
1. Install the reverse warning buzzer and secure it with two plastic rivets.
Page 13-12 2013 Carryall 295/XRT 1550 Maintenance and Service Manual