ClipperCreek HCS-D Series User Manual Download

Page: 4 / 40

HCS-D User Manual

ILLUSTRATIONS

Figures

1. HCS-D Front Panel .......................................................................................13

2. 220/240V Single Phase .................................................................................18

3. 208V 3-Phase, Wye-Connected .....................................................................18

4. 240V 3-Phase, Delta-Connected, w/Center-Tap on One Leg ........................19

5. Mounting the HCS-D to a Hollow-Wall ........................................................24

6. Mounting the HCS-D to a Solid-Wall ...........................................................26

7. Wiring the HCS-D in a Junction Box ............................................................27

8. Preferred Orientation of the NEMA Receptacles Below

the Plug-in HCS-D ........................................................................................28

9. Locking the

SAE-J1772

Connector with Padlock Included .......................30

10. Charge Connector Secured with Padlock which Cannot

be Removed from Vehicle without Key ........................................................30

11. Padlock Used in Combination with Connector Holster After Charging .......30

12. Mounting the

SAE-J1772

Connector Holsters Using the

Exterior Wood Screws and Washers ..............................................................34

13. Example of Installed HCS-D and Two Connector Holsters ..........................34

14. Charge Cable Draped too Tightly Around the HCS-D Enclosure .................35

Tables

1. Front Panel LED Information........................................................................13

2. Service Connections for Standard and Ruggedized HCS-D .........................14

Summary of Contents for HCS-D Series









































Search results

Summary of Contents for HCS-D Series

Reviews:

Related manuals for HCS-D Series

Brands by name

Popular brands

ClipperCreek HCS-D Series, User Manual

Search results

Summary of Contents for HCS-D Series

Reviews:

Related manuals for HCS-D Series

Brands by name

Popular brands