HCS-D User Manual
33
MOUNTING THE
SAE-J1772
TM
CONNECTOR
HOLSTERS
The SAE-J1772
TM
connector holsters are included to provide a
convenient protective housing for the
SAE-J1772
TM
connector head
when it is not in use.
• The
SAE-J1772
TM
connector holster should be placed so that
users have easy and safe access to the
SAE-J1772
TM
connector.
•
• For indoor installation, mount the
SAE-J1772
TM
connector
holster between 18” and 48” above the ground or grade.
•
• For outdoor installation, mount the
SAE-J1772
TM
connector
holster between 24” and 48” above the ground or grade.
•
• The
SAE-J1772
TM
connector holster has two vertically aligned
mounting holes spaced 5.45” apart, one each on the enclosure
top and bottom. Use a ruler or template to mark hole locations
on the mounting surface.
•
• The vertical alignment of the HCS-D and
SAE-J1772
TM
connector holster mounting holes allows for the convenient
mounting of both components onto the same post or wall
structure. For example, the holster may be mounted directly
above the HCS-D.
•
• Place the
SAE-J1772
TM
connector holster such that both
mounting holes can take advantage of solid structural framing
inside of the wall or a strong wall surface such as plywood.
•
• A set of exterior wood screws and stainless steel washers
are included for the purposes of mounting the
SAE-J1772
TM
connector holster to a wooden surface.
•
• For mounting to a solid surface such as concrete, brick, or
stone, alternate hardware may need to be procured. Examples
of solid-wall mounting hardware include multi-sets, wedge
anchors, and sleeve anchors. Use the type of mounting
hardware most appropriate for the supporting structure.
