HCS-D User Manual
22
MOUNTING PROCEDURES
Determine the wall mounting location for the EVSE:
• On the hardwired HCS-D, the three service conductors are
shielded by three feet of flexible conduit at the bottom of the
unit. The HCS-D must be positioned such that this conduit can
reach a nearby junction box.
• On the plug-in HCS-D, the NEMA plug head is connected
by one foot of cable (including the plug head) to the bottom
side of the HCS-D. The plug-in HCS-D must be positioned
such that this plug can safely be inserted into a wall-mounted
NEMA socket.
• Position the bottom of the EVSE at a comfortable height and at
least 18” above the ground for indoor installations and 24” off
the ground for outdoor installations. Ensure that the front panel
indicators of the EVSE can clearly be seen by the user of the
device.
• The HCS-D has two vertically aligned mounting holes spaced
17” apart, one each on the enclosure top and bottom. Use
a ruler or template to mark hole locations on the mounting
surface.
WARNING:
For safety, always turn off input power to the
EVSE at the circuit breaker panel prior to plugging it in or
wiring it to the service lines. Likewise, turn off the circuit
breaker prior to unplugging it or disconnecting the unit
from the service lines.
AVERTISSEMENT:
Pour sécurité, toujours désactiver
le courant d’entrée de la station de recharge au niveau du
disjoncteur du panneau avant de le brancher ou de câblage
à les lignes de service. De même, coupez le disjoncteur
avant de le débrancher ou déconnecter l’unité à partir des
lignes de services.
