HCS-D User Manual
14
INSTALLATION
-
SERVICE CONNECTIONS
CAUTION:
To reduce the risk of fire, connect only to a
circuit provided with the appropriate maximum branch
circuit overcurrent protection in accordance with the
National Electrical Code, ANSI/NFPA 70 (US) or the
Canadian Electric Code C22.2 NO. 280-13 (Canada).
ATTENTION:
Pour réduire le risque d’incendie, de se
connecter uniquement à un circuit fourni avec le approprié
circuit de dérivation protection maximale contre les
surintensités, en conformité avec le Code National électrique
ANSI/NFPA 70 (US) ou Code Canadien de l’électricité
C22.2 NO. 280-13 (Canada).
PRECAUCIÓN:
para reducir el riesgo de incendio,
conécte el dispositivo solo a un circuito de protección contra
sobrecorriente máxima del circuito derivado, de acuerdo
con el Código Eléctrico Nacional, ANSI/NFPA 70 (Estados
Unidos) O el Código Eléctrico Canadiense C22.2 Número
280-13 (Canadá).
CAUTION:
This is a single-phase device. Do not connect
all three phases of a 3-phase feed!
You may use any two
phases of a three phase wye-transformer feed. The
centerpoint of the three phases (usually used as Neutral)
HCS-D40 (Hardwired)
40A
n/a
HCS-D40P NEMA 6-50P
40A/50A
NEMA 6-50R
HCS-D40P NEMA 14-50P
40A/50A
NEMA 14-50R
HCS-D40R (Hardwired)
40A
n/a
HCS-D40PR NEMA 6-50P
40A/50A
NEMA 6-50R
HCS-D40PR NEMA 14-50P
40A/50A
NEMA 14-50R
HCS-D50 (Hardwired)
50A
n/a
HCS-D50P NEMA 6-50P
50A
NEMA 6-50R
HCS-D50P NEMA 14-50P
50A
NEMA 14-50R
HCS-D Model
Circuit Breaker Rating
Receptacle Type
Table 2: Service Connections for Standard and Ruggedized
HCS-D
