HCS-D User Manual
13
The HCS-D Front Panel
The front panel on the HCS-D has six
indicator lights, as shown in
Figure 1.
The three colored indicators - left and
right - display status for each of the
two vehicle connectors.
POWER
(Amber), indicates that
power is available to the HCS-D.
FAULT
(Red), refer to Fault
Conditions in
Table 1
.
CHARGING
(Green), indicates that
the vehicle is requesting a charge and
AC power is currently applied to the
vehicle.
Figure 1: HCS-D Front
Panel LED Information
Table 1: Front Panel Indicator Information
ON - not
blinking
No power to the EVSE. Check circuit breaker.
EVSE has power, not plugged into PEV, or
PEV not requesting a charge.
Charging enabled, power is applied to the
vehicle.
Ground monitor trip, improper grounding or
ground is not present.
PEV ground fault trip. Check vehicle
connection, disconnect and restart.
Internal PEV Fault. Disconnect from vehicle, turn power
off and then back on. If fault persists, call for service.
Internal PEV Fault. Disconnect from vehicle, turn power
off and then back on. If fault persists, call for service.
Internal PEV Fault. Disconnect from vehicle, turn power
off and then back on. If fault persists, call for service.
Internal PEV Fault. Disconnect from vehicle, turn power
off and then back on. If fault persists, call for service.
Amber
POWER
Red
FAULT
Fault Condition
#
Green
CHARGING
1
off
off
off
2
ON
off
off
3
ON
off
ON
4
ON
off
5
off
1 - blink
off
6
off
2 - blinks
off
7
off
3 - blinks
off
8
off
4 - blinks
off
9
off
5 - blinks
off
