Clevo W330AU User Manual Download

Page: 61 / 260

Running Apps 1 - 29

Quick Start Guide

Running Apps

To run apps in

Windows 8.1

you will need to check that the

Screen Resolution

and

User Account Control Set-

tings

are compatible with the system requirements.

Screen Resolution Settings

Switch to the Windows Desktop (click the app or use the Windows logo key

+ D

key combination).

Right-click a blank area of the Windows Desktop and select

Screen Resolution

. Adjust the

Resolution

make sure that it is at least

1024 * 768,

although preferably

1366 * 768

or above (see sidebar).

Figure 1 - 21

- Screen Resolution



Screen Resolution for Apps

(Windows 8.1)

The minimum resolution in which Apps will run is

1024x768

The minimum resolution required to support all the features of
Windows 8 (including multitasking with snap) is

1366x768

These specs are the minimum screen resolution that supports
all the features of Windows 8.1 on a useful physical size.

Summary of Contents for W330AU





































































































































































































































































Search results

Summary of Contents for W330AU

Reviews:

Related manuals for W330AU

Brands by name

Popular brands

Clevo W330AU, User Manual

Search results

Summary of Contents for W330AU

Reviews:

Related manuals for W330AU

Brands by name

Popular brands