manualshive.com logo in svg

Clevo W330AU, User Manual, Page: 238 / 260

Share
Download
Clevo W330AU User Manual Download Page 238

E - 24 Wireless LAN (Windows 7)

Windows 7

Windows 7

Intel® WLAN Driver Installation

1.

Make sure the module is powered on, and then insert the 

Device Drivers & Uti User’s Manual 

disc into an attached DVD drive. 

2.

Click

 

Option Drivers

 (button).

3.

Click

 

2.Install WLAN Driver > Yes

.

4.

Click in the check box to agree to the 

End User License Agreement

 and click 

Install

.

5.

Click

 

Finish

.

6. The operating system is the default setting for Wireless LAN control in 

Windows 

(see page 

E - 25

).

OR

3rd Party WLAN Driver Installation

1.

Make sure the module is powered on, and then insert the 

Device Drivers & Uti User’s Manual 

disc into an attached DVD drive. 

2.

Click

 

Option Drivers

 (button).

3.

Click

 

2.Install WLAN Driver > Yes

.

4.

Click 

Next

.

5.

Click

 

Finish 

to restart the computer.

6. The operating system is the default setting for Wireless LAN control in 

Windows 

(see page 

E - 25

).

Summary of Contents for W330AU





































































































































































































































































Reviews:

No comments