Clevo W330AU User Manual Download

Page: 119 / 260

BIOS Utilities

Boot Menu 5 - 13

Boot Menu

When you turn the computer on it will look for an operating system (e.g.

Windows

) from the devices listed in this menu, and

in this priority order

. If it cannot find

the operating system on that device, it will try to load it from the next device in the
order specified in the

Boot Option Priorities

. Item specific help on the right is

available to help you move devices up and down the order.

Figure 5 - 6

Boot Menu



BIOS Screens

Note that the BIOS
screens pictured on
these pages are intend-
ed for guidance in set-
ting up your system’s
BIOS.

BIOS versions are sub-
ject to constant change
and revision, therefore
your computer’s actual
screens may appear
slightly different from
those pictured on these
pages.

Summary of Contents for W330AU





































































































































































































































































Search results

Summary of Contents for W330AU

Reviews:

Related manuals for W330AU

Brands by name

Popular brands

Clevo W330AU, User Manual

Search results

Summary of Contents for W330AU

Reviews:

Related manuals for W330AU

Brands by name

Popular brands