Clevo W330AU User Manual Download

Page: 204 / 260

Video Driver Controls

C - 18 Attaching Other Displays

To Enable Extended Mode:

Attach your external display to the HDMI-Out port/external monitor port, and turn it on.

Go to the

Intel(R) HD Graphics Control Panel

control panel and click

Display

Multiple Displays

(sub-menu).

Click

Extended

from the

Select Display Mode

menu.

Click

Apply

, and

to confirm the settings change.



Display Settings

Extended Desktop

You can have different
Colors, Screen Area
and Monitor Refresh
Rates for each display
device

provided your

monitor can support
them

You can drag the moni-
tor icons to match the
physical layout of your
displays. Icons and pro-
grams may also be
dragged between the
displays.

Figure C - 16

Display > Multiple

Displays (Extended)

Click the appropri-
ate monitor icon
and drag it to match
the physical ar-
rangement you
wish to use (e.g. the
secondary display
may be extended
left/right/above/be-
low the primary dis-
play).

Summary of Contents for W330AU





































































































































































































































































Search results

Summary of Contents for W330AU

Reviews:

Related manuals for W330AU

Brands by name

Popular brands

Clevo W330AU, User Manual

Search results

Summary of Contents for W330AU

Reviews:

Related manuals for W330AU

Brands by name

Popular brands