Clevo W330AU User Manual Download Page 250

Page: 250 / 260

E - 36 3G/4G Module (Windows 7)

Windows 7

3G/4G Driver

With the

3G/4G

module and USIM card (supplied by your service provider) installed you may then install the

driver below to directly access your 3G/4G internet service from the computer.

3G/4G Driver Installation

Make sure the system is not in Airplane Mode.

2. If a

Found New Hardware

window appears, click

Cancel

(click

Cancel

for all

Found New Hardware

windows that appear).

3. Insert the

Device Drivers & Uti User’s Manual disc

into an attached DVD drive.

4. Click

Option Drivers

(button).

5. Click

4.Install 3G/4G Driver

> Yes

6. Click

Next

7. Click

I Agree

(button) to accept the license agreement.

8. Click

Install

9. Click

Finish

10. See over for 3G/4G connection information.

Summary of Contents for W330AU





































































































































































































































































Search results

Summary of Contents for W330AU

Reviews:

Brands by name

Popular brands

Clevo W330AU, User Manual

Search results

Summary of Contents for W330AU

Reviews:

Brands by name

Popular brands