Clevo W330AU User Manual Download

Page: 105 / 260

Drivers & Utilities (Win 8.1)

Driver Installation 4 - 9

Optional Drivers

See the pages indicated for the driver installation pro-
cedures for any modules included in your purchase op-
tion.

Figure 4 - 3

- Drivers Installer (Options)

Note that you need to install both the WLAN & Blue-
tooth drivers for the WLAN & Bluetooth Combo
modules.



Windows Update

After installing all the drivers make sure you enable

Win-

dows Update

in order to get all the latest security up-

dates etc. (all updates will include the latest

hotfixes

from Microsoft). To enable

Windows Update make

sure you are connected to the internet

1. Go to the

Control Panel

2. Click

Windows Update

(System and Security/

Security).

3. Click

Check for updates

(button).

4. The computer will now check for updates (you need

to be connected to the internet).

5. Click

Install now

(button) to begin checking for the

updates.

6. Click

Install updates

(button) to install the updates.

Summary of Contents for W330AU





































































































































































































































































Search results

Summary of Contents for W330AU

Reviews:

Related manuals for W330AU

Brands by name

Popular brands

Clevo W330AU, User Manual

Search results

Summary of Contents for W330AU

Reviews:

Related manuals for W330AU

Brands by name

Popular brands