Clevo L285P, User Manual

Page: 27 / 167

Introduction
1 - 6 Quick Start Guide
1
Quick Start Guide
This guide assumes that you are already familiar with computers and
can tell at a glance what and where all the key components are. If you
are not that comfortable with this type of device, then please refer to
the following pages, which give an overview of the system.
It is still best to review these steps, before taking any action. If there
is anything you are not sure about, then please refer to the appropri-
ate chapter before continuing.
Unless you need to install an operating system your computer should
be ready to work right out of the box. Before you begin please follow
the safety instructions in the Preface.
1. Remove all packing materials, CD/DVDs, floppy disks, and any
PC Cards.
2. Securely attach any peripherals you want to use with the com-
puter (e.g. keyboard and mouse) to their ports.
3. Attach the AC power cord to the AC Power-In port on the right
of the computer.
Then plug the AC power cord into an outlet.
4. Push the power button to turn the computer “on”.
Peripheral Devices
Please note that pe-
ripherals (printers, dig-
ital cameras, etc.)
which attach to your
computer by either
USB or IEEE1394
ports may be connect-
ed
after Windows is up
and running. All other
peripherals must be
connected
before you
turn on the system.