MAINTENANCE
INSPECTION AND MAINTENANCE CHECK LIST
Cleveland Range equipment requires little preventative maintenance. We do however provide the following chart as a
guide line for inspection and maintenance to keep your unit functioning at 100%.
Item
Inspection
MONTHLY INSPECTIONS
Switches
Inspect switches for damage and correct operation. Replace as required.
Product Drain Valves
Butterfly Valve
Inspect parts for damage. Test valve for leakage. Replace as required.
Air Valve
Inspect parts for damage. Test valve for leakage. Check valve seals for air leakage. Inspect
supply hose and fittings. Replace as required. Inspect air filter and replace if required.
SIX MONTH MAINTENANCE
Lubrication
Grease trunnion housings and gear/worm assembly as recommended in Lubrication
Instructions.
Grease bridge swivel assembly.
Use "Never Seize" on tilt worm and gear.
Kettle Console Cover
Inspect gasket material for integrity. Replace if necessary.
Insure all screws are in place and firmly holding down the cover.
If not replace/tighten screws.
Hand wheel
(hand tilt models only)
Check hand wheel for tightness. If loose tighten allen screw.
Tilting
(tilting models only)
Check that kettle tilts smoothly. Grease as described in Lubrication Procedure.
On-Off Switch/Temperature Control
Check for damage. Replace if necessary.
Pressure Gauge
Check that the gauge does not have moisture on its inside face. Replace if moisture is present.
Check that the gauge shows a vacuum (needle is well into the Green zone) when cold and shows
between 25-40 psi when unit is hot. If not follow Vacuum Leak Test Procedure.
Pressure Relief Valve
Check pressure relief valve as described in Pressure Relief Valve Testing Procedure .
Temperature Check
Following Calibrating Procedure check the inner kettle surface temperature with a digital
surface thermometer. Adjust if required.
Gear/Worm Assembly
Inspect for play. Tighten Allen screws if required.
YEARLY MAINTENANCE
Lubrication
Drain hydraulic oil and remove filter. Replace oil and filter (see Hydraulic Oil Replacement
Procedure).
Solenoid Valves
Inspect solenoid valves for proper operation. Clean or replace as required.
