OPERATING INSTRUCTIONS
3
4
5
2
1
7
8
9
12 13 14
6
10
11
17
16
15
20
21
23
19
18
22
ITEM #
DESCRIPTION
FUNCTION
1.
Low Water Indicator Light (Red)
When lit, indicates that the kettle is low on water and will not operate
in this condition. This will also light when the kettle is tilted.
2.
On-Off Switch/
Turns kettle ON/OFF and allows the operator to adjust the kettle
Solid State
temperature in increments from 1 (Min.) to 10 (Max.).
Temperature Control
3.
Heat Indicator Light (Green)
When lit, indicates that the kettle's burner is on.
Cycles ON-OFF with burner.
4.
Ignition Failure Indicator Light
Indicates failure of heating system to ignite.
(Amber)
(Used prior to July 2004)
5.
Vacuum/Pressure Gauge
Indicate steam pressure in PSI inside steam jacket as well as
vacuum in inches of mercury.
6.
Pressure Relief Valve
This valve is used to vent the kettle and in the unlikely event there is
(not shown)
an excess steam build-up in the jacket, this valve opens
automatically to relieve this pressure.
7.
Water Level Sight Glass
Displays water level in steam jacket.
8.
Tilt Wheel
Used for tilting the kettle on hand tilt models. In power tilt models
there is a toggle switch in same location.
9.
Butterfly Valve
Used for draining product or wash water from kettle.
10.
Mixer Speed Control
Controls speed of agitators and mixer bridge lift mode.
11.
Emergency Stop
Stops hydraulic system.
12.
Main Power Switch
Power switch for unit.
13.
Mix/Lift Switch
Sets hydraulics to mix or lift mode.
14.
Up/Down Switch
When unit is in lift mode, bridge can be raised or lowered with this switch.
15.
Faucet Spout
Delivers water to the kettle.
16.
Cold Water Valve
Turns on cold water.
17.
Hot Water Valve
Turns on hot water.
18.
Mixer Bridge
Encloses agitator motors.
19.
Main Agitator Arm
Provides most of the product movement.
20.
Secondary Arm
Provides reverse agitation and product lift in kettle.
21.
Scraper Blades
Scrapes the side of the kettle and moves product away.
22.
Secondary Speed Control
Controls speed of secondary agitator arm.
23.
Temperature Probe
Probe holds temperature sensors for controller.
Operating Controls & Indicators