91c_LCD en bedingt.fm, 24.09.2007
P1891E/EN 09/07
29
LCD display
6
6.3.6
Set position submenu – only with Linking enabled
6.3.7
Scanner submenu – only for types of the 47BA...S series
Speed
The start button starts the tool at the maximum speed.
Second line: Current output shaft speed.
Third line: Current torque.
Rotational speed measurement is based on the angle information of the resolver.
If you release the start button, the tool stops. As a safety function the torque is
monitored by the tool transducer. If it exceeds 15 % of its calibrated value, the
speed measurement is terminated.
Selects the position to be used next.
You can skip the position.
You can select the position to be used next using the function keys:
➔
<F1>: Activate the previous position.
➔
<F2>: Activate the next position.
➔
Press the start button or <F2> longer than 2 seconds
to accept the select and display the next menu item.
➔
Press <F1> longer than 2 seconds
to delete the selection and exit the menu.
Reset linking to position 1. The operator could terminate linking.
Scanner
– Deletes a previously read barcode and activates a new read cycle.
➔
Press the start button or <F2> longer than 2 seconds.
Speed
Rpm466
T 0.02
<Posit
Change
Positi
Select
Positi
2/6
>Posit
Reset
Positi
<Scann
Activa
Scanne
