CLEAN BURN CB-3500 series, Operator'S Manual

Page: 15 / 134

Operator's Manual: Models CB-3500 & CB-5000
1-7
For Your Safety... (continued)
To avoid possible injury, death, or
equipment damage, read and
understand operator's manuals and
all safety precautions before
installing, operating, or servicing this
equipment.
WARNING
Fire, explosion and burn hazards:
Maintain clearances from
combustibles as listed on unit.
ONLY burn used crankcase
oil, automatic transmission
fluid, hydraulic oil, or #2 fuel
oil. NEVER burn any other
substances in this unit.
Hot gases and ash may be released when
inspection port is opened.
Wear safety goggles and hand protection
when opening inspection port.
Keep face away and open port slowly.
•
•
42367 Rev. 2
42030 Rev. 2
Hazardous voltage.
To prevent serious injury, shut OFF main
power to unit before removing cover.
Line voltage is present on most
subbase terminals when power is ON.
If the furnace is not wired correctly.
fire, shock or damage could result.
ONLY a qualified electrician should wire
this furnace.
ONLY use copper conductors.
•
•
WARNING
Blower can start at any time.
Turn power OFF before servicing.
Do NOT operate without guard in place.
Entanglement and cutting hazard.
42068 Rev. 2
WARNING
Burner may fire at any time.
Disconnect burner power cord
before swinging open burner
or clean-out door.
Burn Hazard.
Hazardous Voltage.
WARNING
42027 Rev. 2
Furnace Cabinet Safety Labels