73
EQ 1000
MOTORIZED WHEEL BALANCER WITH DIGITAL DISPLAY
MAINTENANCE
MACHINE DEMOLITION
ENVIRONMENTAL INFORMATION
The producer declines all responsibility for claims deriving from the use of non original spare parts or accessories.
Unplug the machine from the power supply and make sure that all moving parts have been locked before performing
any adjustment or maintenance operation. Do not remove or modify any part of the machine (except for service
interventions).
Keep the work area clean.
Never use compressed air and/or jets of water to remove dirt or residues from the machine.
Take all possible measures to prevent dust from building up or raising during cleaning operations.
Keep the wheel balancer shaft, the securing ring nut, the centring cones and fl ange clean. These components
can be cleaned using a brush previously dripped in environmentally friendly solvents. Handle cones and fl anges
carefully so as to avoid accidental dropping and subsequent damage that would affect centring accuracy. After
use, store cones and fl anges in a place where they are suitably protected from dust and dirt. If necessary, use ethyl
alcohol to clean the display panel.
Perform the calibration procedure at least once every six months.
If the machine is to be scrapped, remove all electrical, electronic, plastic and metal parts and dispose of them
separately in accordance with current provisions as prescribed by law.
The following disposal procedure shall be exclusively applied to the machines having the crossed-out bin symbol
on their data plate.
This product may contain substances that can be hazardous to the environment and to human health if it is not
disposed of properly.
The following information is therefore provided to prevent the release of these substances and to improve the use
of natural resources.
Electrical and electronic equipment must never be disposed of in the usual municipal waste but must be separately
collected for their proper treatment.
The crossed-out bin symbol, placed on the product and on this page, reminds the user that the product must be
disposed of properly at the end of its life.
In this way it is possible to prevent that a non specifi c treatment of the substances contained in these products,
or their improper use, or improper use of their parts may be hazardous to the environment or to human health.
Furthermore, this helps to recover, recycle and reuse many of the materials contained in these products.
Summary of Contents for EQ 1000
Page 29: ...29 EQ 1000 EQUILIBREUSE ROUES MOTORISEE AFFICHAGE DIGITAL ...
Page 75: ...NOTES ...
