EQ 1000
MOTORIZED WHEEL BALANCER WITH DIGITAL DISPLAY
USE OF THE MACHINE
To use the machine, you must select or set as follows:
• Programme type (programme for wheels with steel, aluminium or special aluminium rims).
Default = programme for wheels with steel rims;
• Wheel Type (auto-vehicle, motorbike, off-road). Default = auto-vehicle;
• Dimensions of the wheel to balance. The dimensions can be entered manually (always) or partially or fully
in automatic (only available on some models).
• Dynamic or Static balancing. Default = Dynamic;
• Display resolution X1 or X5. Default = X5;
The selections described above may be entered before or after the launch. For any variation of the selection or data
settings, the machine will run a recalculation by displaying the new values of imbalance.
Once the selections/settings have been entered, you can run a launch by pressing [P8] Start or by lowering the
wheel guard.
At the end of the launch, the machine displays the wheel imbalance values.
Apply the weights displayed by the machine at the indicated positions and then run a second test launch. Normally,
the weights should be applied at the 12 o’clock position with the exception of special programmes for ALS2 and
ALS1 aluminium.
Tableau T3.1. Programmes available
Programme
type
Wheel
material
Weight position along the rim section
Automatic
acquisition(1)
Notes
STD
Steel
Default
2 sensors
Start-up default
ALU1
Aluminium
Default
2 sensors
Forcibly set when the Motorbike
Programme Type is selected
ALU2
Aluminium
Default
2 sensors
ALU3
Aluminium
Default
2 sensors
ALU4
Aluminium
Default
2 sensors
ALU5
Aluminium
Default
2 sensors
ALS1
Aluminium
Default for the internal weight, provided by
the user for the ex ter nal weight
1 sensor
ALS2
Aluminium
Provided by the user
1 sensor
(1)Available only for some versions.
Summary of Contents for EQ 1000
Page 29: ...29 EQ 1000 EQUILIBREUSE ROUES MOTORISEE AFFICHAGE DIGITAL ...
Page 75: ...NOTES ...
