67
EQ 1000
MOTORIZED WHEEL BALANCER WITH DIGITAL DISPLAY
This Test Programme menu option sets the machine back in the SERVICE mode
[P2] Not used
This button is not currently used in Service mode.
[P3] Machine calibration
This button allows accessing the machine’s calibration procedure as described in detail in chapter 4 Machine
calibration.
[P4] Select grams/ounces
By pressing this button, the machine alternates the unit of measure of the wheel weight: if the unit of
measure selected is in grams, select ounces and vice versa. This selection is maintained even when the machine
is shut-down.
The unit of measurement selected will be displayed for one second.
[P5] Select inches/millimetres
By pressing this button, the machine alternates the unit of measure of the wheel dimensions: if the unit
of measure selected is in inches, select mm and vice versa. This selection is maintained even when the machine is
shut-down.
The unit of measurement selected will be displayed for one second.
[P6] Select the imbalances view threshold
This button allows editing the imbalances view threshold. This procedure is intended for technical support
personnel and is not described in this manual.
[P9] Not used
This button is not currently used in Service mode.
[F+P1] Not used
This button is not currently used in Service mode.
[F+P2] Select weight material in Fe/Zn, or Pb
Use this button to select the balancing weight material. The options available are listed in table T9.1. The
selection of the material type slightly changes the balancing results because the weights in Iron/Zinc are lighter
than those in Lead and therefore are larger.
The machine takes account of these differences when calculating the imbalance.
Summary of Contents for EQ 1000
Page 29: ...29 EQ 1000 EQUILIBREUSE ROUES MOTORISEE AFFICHAGE DIGITAL ...
Page 75: ...NOTES ...