EQ 1000
MOTORIZED WHEEL BALANCER WITH DIGITAL DISPLAY
UTILITY PROGRAMMES
Utility programmes are available only in NORMAL mode.
Selecting the imbalance display resolution
The machine has two wheel imbalance display resolutions. The two resolutions are defi ned as X1 (high
resolution) and X5 (low resolution). The resolution with which the imbalances of the wheel are displayed varies
depending on the unit of weight as indicated in table T8.1.
Table T8.1 Display resolution
Set resolution
Imbalance unit of measure
Display resolution
Notes
X1
(high resolution)
Grams
1 gram
Ounces
0,1 ounce
X5
(low resolution)
Grams
5 grams
The X5 resolution is set by
default at start-up
Ounces
0,25 ounces
To view the imbalance in X1 resolution (high resolution) press [F+P1]. The machine will display the message
visible in Figure F8.1.0a for one second and the LED next to the button will turn on. Imbalance values are now
displayed in X1 resolution (high resolution).
Fig. F8.0a Enabling of the imbalance display in high resolution.
To return to viewing in X5 resolution (low resolution) press [F+P1] again. The machine will display the message
visible in Figure F8.0b for one second and the LED next to the button will turn off. Imbalance values are now
displayed in X5 resolution (low resolution).
Fig. F8.0b Disabling imbalance view in high resolution.
Selection of the static imbalance display
To view the static imbalance, press [F+P2]. The machine will show the static imbalance
value on the display as seen in fi gure F8.1 and the LED next to the button lights up.
Summary of Contents for EQ 1000
Page 29: ...29 EQ 1000 EQUILIBREUSE ROUES MOTORISEE AFFICHAGE DIGITAL ...
Page 75: ...NOTES ...
