Clarion MAX983HD Owner'S Manual Download

Page: 61 / 187

MAX983HD

English

9. Others

Troubleshooting

Error Messages

Problem

Cause

Remedy

RDS-TMC

The provider of RDS-TMC is not
automatically selected.

The aerial is not connected.

Confirm the connection of the
aerial.

[

Manual

] is selected on the

Select TMC Provider screen.

Select [

Automatic

The menu screen is not
displayed.

Certain keys/functions are not
available for your safety during
driving.

Menu is displayed again when
the vehicle is stopped in a safe
place.

Too many landmark icons are
displayed on the map.

According to system settings,
many landmark icons are
displayed according to the
current location.

You can set the system not to
display landmark icons.
“

Landmark Icon display

”

(P. 45)

Error Message

Cause

Remedy

SD Card

ACCESS ERROR
Memory Card access failed

The SD card is not set correctly. Set the SD card again.

The SD card is not recognised.

Set another SD card.

Hard Disk Drive

HIGH TEMP ERROR
Please wait until the temperature
becomes normal

The HDD cannot be accessed
because the temperature in the
vehicle is extremely high.

Please wait until the temperature
becomes appropriate.

LOW TEMP ERROR
Please wait until the temperature
becomes normal

The HDD cannot be accessed
because the temperature in the
vehicle is extremely low.

Please wait until the temperature
becomes appropriate.

HDD ACCESS ERROR
Please consult a dealer

The HDD cannot be accessed.
The sectors or clusters of the
HDD may be damaged.

Please consult you nearest
dealer.

Summary of Contents for MAX983HD




























































































































































































Search results

Summary of Contents for MAX983HD

Reviews:

Related manuals for MAX983HD

Brands by name

Popular brands

Clarion MAX983HD, Owner'S Manual

Search results

Summary of Contents for MAX983HD

Reviews:

Related manuals for MAX983HD

Brands by name

Popular brands