Clarion MAX983HD Owner'S Manual Download | Manualshive

Page: 133 / 187

background image

37

MAX983HD

English

Owner

’s ma

nua

l

Audio CD Operations

This system can display the track information (Album title, Track title, Artist name, and Genre) of the
currently played disc by using the Album Information data stored in this system.
In addition, this system can record the audio data of the disc by compressing into ATRAC3 format, and
store them as the Music Catcher data.

➜

“

Recording tracks from a CD

” (P. 39),

➜

“

Music Catcher

Operations

” (P. 40)

●

About the track information of the
recorded data

When the track information can be obtained from
the Album Information data, this data is used as
the track information. If not, the album title is
named using the recording date and a
consecutive number (such as “

2008. 6. 10-001

”),

and the track title is named such as “

Track 01

”.

You can edit this information in the Music
Catcher mode.

➜

“

Editing album/track

information

” (P. 42)

Note:

•

This system can play back/record the CDDA discs,
and cannot play back/record the DTS CD discs.
Some discs with CCCD or the other format may be
able to play back.

•

The Gracenote Media Database can be imported
into the hard disk drive by using the SD card.

➜

“

Importing Data Using the SD Card

” (P. 70)

Selecting the Audio CD mode

1. Set an audio CD to the DVD player.

The system will automatically read the disc
data, change to the Audio CD mode, and start
playback after a while.

➜

“

Setting/Ejecting a

Disc

” (P. 15)

And also, recording data into the Music
Catcher will be automatically started when the
CD is not recorded in the Music Catcher.
• You can change the setting so that the

recording is not performed automatically but
performed manually.

➜

“

Switching the CD

Recording mode

” (P. 66)

Note:

•

While recording the CD, no operation for the disc
can be made unless cancelling the recording. If
you cancel recording, you can restart the recording
by the manual operation.

➜

“

Recording tracks

from a CD

” (P. 39)

●

When an audio CD is already set

1. Press the [

SRC

] (Source) button to display the

Source menu screen.

2. Touch the [

DVD/CD

] key to select the Audio

CD mode.
The system changes to the Audio CD mode,
and starts playback from the previous
position.

Audio CD mode screen

●

AV Shortcut menu on the Map screen

WARNING

•

Some CDs may be recorded at a higher
volume level than desired. Increase the
volume gradually from the minimal
setting after the playback has started.

Album title

Track list pane

Information pane

Track title/Recording status

«
...
131
132
133
134
135
...
»

Summary of Contents for MAX983HD




























































































































































































Reviews:

No comments

Related manuals for MAX983HD

Brand: Eonon Pages: 35

Brand: Garmin Pages: 290

Brand: Hamma Pages: 60

Brand: Metra Electronics Pages: 12

Brand: Alpine Pages: 133

nuvi 705 series

Brand: Garmin Pages: 77

DTM High Speed 7910

Brand: Becker Pages: 4

Brand: Audiovox Pages: 36

Prodigy One TD-RCD510-KIT

Brand: Directus Pages: 21

NAV-PNF-50 Truck

Brand: A-rival Pages: 52

Brand: Toyota Pages: 229

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 8

CYVMX6800U - 6.8" CLR MONITOR/DVD

Brand: Panasonic Pages: 76

CYVH9300U - 9" OVERHEAD MONITOR

Brand: Panasonic Pages: 83

Brand: Panasonic Pages: 244

Brand: Harman Kardon Pages: 3

Brand: Viking Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands