Clarion MAX983HD Owner'S Manual Download

Page: 33 / 187

Changing/Editing the Route Settings

MAX983HD

English

• [

Delete

]: Displays a confirmation screen. If

you touch the [

Yes

] key, the destination/

waypoint is deleted.

• [

]: You can adjust the location of the

destination/waypoint by scrolling the map.

[

(Route calculation condition icon)

]

You can change the conditions of route
calculation. When you change a condition, the
route is recalculated with the specified
condition. When waypoints are specified, you
can set the condition for each section of the
route.
• [

Calculates the route of which the required
time is shortest.

• [

Calculates the route of which motorways
are not used as much as possible.

• [

Calculates the route of which the distance is
shortest.

Storing the current route

Stores the current route as the Stored Route.

➜

“

Stored Route

” (P. 50)

1. Touch the [

Store Current Route

] key.

A confirmation screen is displayed. Touching
the [

Yes

] key stores the current route.

Note:

To register the current route, at least one waypoint is
required.

Setting the conditions of the
route calculation

You can customise the conditions of the route
calculation.

Note:

The conditions set in the Route Priority menu screen
are applied to the current route, the recalculation is
performed automatically.

1. Touch the [

Route Priority

] key.

The Route Priority menu screen is displayed.

2. Touch the condition you wish to use.

Touching the [

Back

] key returns to the

previous screen.

[

Fastest Route

]

Calculates the route of which the required
time is shortest.
[

Minimize Motorways

]

Calculates the route of which motorways are
not used as much as possible.
[

Shortest Route

]

Calculates the route of which the distance is
shortest.
[

Set Route Preferences

]

Sets the detailed condition of the route
calculation.
• [

Minimize Toll Roads

]: Minimises the use

of toll roads.

• [

Use Time Restricted Roads

]: Uses roads

with restricted usage time.

• [

Use RDS-TMC information

]: Considers

the RDS-TMC information for routing.

• [

Use Avoid Area Settings

]: Takes a detour

to avoid the registered Avoid Area.

• [

Use Ferries

]: Uses car ferries for routing.

• [

Auto Reroute

]: When leaving the

suggested route during the route guidance
mode, a new route is automatically
recalculated.

Summary of Contents for MAX983HD




























































































































































































Search results

Summary of Contents for MAX983HD

Reviews:

Related manuals for MAX983HD

Brands by name

Popular brands

Clarion MAX983HD, Owner'S Manual

Search results

Summary of Contents for MAX983HD

Reviews:

Related manuals for MAX983HD

Brands by name

Popular brands