19
MAX983HD
English
Outline of Destination Entering Procedures
To start route guidance, operate the navigation system with the following procedure:
●
Select the method of searching destination from the Destination menu screen, then search for
the desired destination.
Select a suitable searching method according to the place to search.
●
Confirm the position of the place found with the Set Location menu screen or Place menu
screen, then set the destination.
You can store the place found to the Address Book, or can confirm the information according to the
place, as well as set it as destination.
●
Start the route guidance from the Set Route menu screen.
You can also display other suggested routes, or confirm information of the route.
Other than the above procedure, you can also enter the destination by scrolling the map or from the
Favourite/Frequent menu.
Setting destination by entering the address
This section explains the basic operation procedure to set the destination in detail, using the example to
specify the destination by entering the address from the Destination menu. Read this explanation
thoroughly because this procedure is similar to other destination entering methods.
For other destination entering methods, see “
3. Entering the Destination
” (P. 22).
1. Press the [
MENU
] button.
The Destination menu of the navigation
system is displayed.
2. Touch the [
Address
] key.
The Address input screen is displayed.
3. Confirm the displayed country name (the
previous country name is displayed). If the
country name you wish to go to is not
displayed, touch the [
Country
] key, otherwise
proceed to the step 5.
4. Touch the country name you wish to go.
The specified country name is displayed.
[
I
] / [
i
]
Scrolls the list up or down by one item.
[
D
] / [
d
]
Scrolls the list by one page.
5. Touch the [
City
] key.
Note:
You can omit the city name entry and directly enter
a road name.
