Clare Controls IP Network Camera, User Manual, Page: 86 / 92

78 Clare Controls IP Network Camera User Guide
2. Click Browse to select the local configuration file, and then click Import to start
importing the configuration files.
Note: You need to reboot the camera after importing a configuration file.
3. Click Export and set the saving path to save the configuration file in local storage .
Upgrading the system
To upgrade the system:
1. Enter the Maintenance interface.
Configuration > Camera Configuration > System > Maintenance
2. Click Browse to select the local upgrade file and then click Upgrade to start the
remote upgrade.
Note: The upgrading process will take 1 to 10 minutes. Do not disconnect the power
of the camera during this process. The camera will reboot automatically after
upgrading.
RS-232 settings
The RS-232 port can be used in two ways:
 Parameters configuration: Connect a computer to the camera through the serial port.
Configure the device parameters using software such as HyperTerminal. The serial
port parameters must be the same as the serial port parameters of the camera.
 Transparent Channel: Connect a serial device directly to the camera. The serial
device will be controlled remotely by the computer through the network.
To configure RS-232 settings:
1. Enter RS-232 Port Setting interface.
Configuration > Camera Configuration > System > RS232