Clare Controls IP Network Camera, User Manual, Page: 42 / 92

34 Clare Controls IP Network Camera User Guide
2. Select the corresponding version checkbox to enable the feature.
, ,
3. Configure the SNMP settings.
Note:
The settings of the SNMP software must match the settings you configured
here.
4. Click Save .
5. When prompted, reboot for the settings to take effect.
Configuring 802.1X settings
The IEEE 802.1X standard is supported by the network cameras. When the feature is
enabled, the camera data is secured. User authentication is needed when connecting
the camera to a network protected by the IEEE 802.1X.
The authentication server must be configured. Register and apply a user name and
password for 802.1X in the server.
To configure 802.1X settings:
1. Enter the 802.1X Settings interface.
Configuration > Camera Configuration > Network > 802.1X
2. Select the Enable IEEE 802.1X checkbox to enable the feature.
3. Configure the 802.1X settings, including the EAPOL version, user name, and
password.
Note:
The EAPOL version must match the router or the switch.
4. Enter the user name and password to access the server.
5. Click
Save to finish the settings.
6. When prompted, reboot for the settings to take effect.