Clare Controls IP Network Camera User Guide
23
Operating PTZ control
In the live view interface, use the PTZ control buttons to realize pan/tilt/zoom control of
the camera.
To realize PTZ control, the camera connected to the network must support the PTZ
function or a pan/tilt unit must be installed on the camera. Properly set the PTZ
parameters on RS-485 settings page.
PTZ control panel
To control PTZ:
1. On the live view page, click
to show the PTZ control panel and
to hide it.
2. Click the direction buttons to control the pan/tilt movements.
3. Click the zoom/iris/focus buttons to realize lens control.
Note:
There are 8 direction arrows ( , , , , , , , ) in the live view
window.
Table 2: Description of the PTZ control panel
Icon
Description
Zoom in/out
Focus near/far
Iris open/close
Light on/off
Wiper on/off
One-touch focus
Initialize lens
Pan/tilt speed
Summary of Contents for IP Network Camera
Page 1: ...Clare Controls IP Network Cameras User Guide Doc ID 2014 12 343 Rev 04...
Page 2: ......
Page 8: ...iv Clare Controls IP Network Camera User Guide...
Page 92: ......