Clare Controls IP Network Camera, User Manual, Page: 10 / 92

2 Clare Controls IP Network Camera User Guide
Safety warnings and cautions
Please pay attention to the following warnings and cautions.
Hazardous voltage may be present: Special measures and precautions
must be taken when using this device. Some voltages on the device may
present a hazard to the user. This device should only be used by employees
from our company with knowledge and training in working with devices that contain live
circuits.
Power supply hazardous voltage:
AC mains voltages are present within the power
supply assembly. This device must be connected to a UL approved, completely
enclosed power supply, of the proper rated voltage and current. There are no user
serviceable parts inside the power supply.
System grounding (Earthing): To avoid shock, ensure that no AC wiring is exposed
and that the earth grounding is maintained. Ensure that any equipment to which this
device will be attached is also connected properly to wired, grounded receptacles.
Power connect and disconnect: The AC power supply cord is the main disconnect
device to mains (AC power). The socket outlet should to be installed near the
equipment and be easily accessible.
Installation and Maintenance: Do not connect/disconnect any cables or perform
installation/maintenance on this device during an electrical storm.
Power cord requirements: The connector that plugs into the wall outlet must be a
grounding-type male plug designed for use in your region. It must have certification by
an agency in your region. The connector that plugs into the AC receptacle on the power
supply must be an IEC 320, sheet C13, female connector. See the following website for
more information http://kropla.com/electric2.htm.
Lithium battery: This device contains a lithium battery. There is an explosion
risk if the battery is replaced with an incorrect type. Dispose of the used
batteries according to the vendor’s instructions and in accordance with local
environmental regulations.