Clare Controls IP Network Camera, User Manual, Page: 61 / 92

Clare Controls IP Network Camera User Guide 53
To upload event-triggered snapshots to FTP:
1. Configure the FTP settings and select the Upload Picture checkbox in the FTP
Settings interface.
2. Select the Upload to FTP checkbox in the Motion Detection Settings.
3. Select the
Enable Event-triggered Snapshot checkbox.
Configuring other alarms
This section is for cameras that support external wireless alarms (access control alarm),
and manual alarm by remote control.
The wireless alarm is the function of the camera to communicate to a wireless alarm
devices such as the access control. The remote control or other remote alarm devices
must be compatible and learn each other’s remote signal to communicate.
Manual Alarm/Emergency Alarm
Certain series of camera support the manual alarm by remote control. These can be
manually triggered and linked to the audio warning. Press and hold the manual alarm
button on the remote control for 2 seconds to trigger the audio warning.
Notes
 The manual alarm is enabled and armed by default and is not user-configurable.
 The manual alarm triggered record will be started if the manual alarm is triggered
on the defined recording schedule, and will be stopped in 10 seconds after the
manual alarm stops.