Clare Controls IP Network Camera, User Manual, Page: 28 / 92

20 Clare Controls IP Network Camera User Guide
IP property settings for wireless network connection
The default IP address of the wireless network interface controller is 192.168.1.64.
When you connect the wireless network you can change the default IP.
To change the default IP:
1. Enter the TCP/IP configuration interface.
Configuration > Camera Configuration > Network > TCP/IP
2. Set Select NIC as wlan.
3. Customize the IPv4 address, the IPv4 Subnet Mask, the IPv4 Default Gateway, and
the Multicast Address.
The setting use the same process as the LAN.
If you do not want to assign the IP address, select the checkbox to enable the DHCP.