28
Clare Controls IP Network Camera User Guide
2. Select the Time Zone.
3. Select the checkbox to enable the
NTP
function.
4. Configure the following settings.
Server Address:
IP address of the NTP server.
NTP Port:
Port of the NTP server.
Interval:
The time interval between the two synchronizing actions of the NTP.
Note:
If the camera is connected to a public network, use an NTP server that has a
time synchronization function. If the camera is set in a customized network, the NTP
software can be used to establish an NTP server for time synchronization.
To change Time Synchronization manually:
1. Enable the
Manual Time Sync
function, and then click
to set the system time
from the pop-up calendar.
Note:
You can select the Sync with computer time checkbox to synchronize the time
of the camera with that of your computer.
2. Click
Save
.
3. Click the
DST
tab page to enable the DST function, and then set the date of the DST
period.
4. Click
Save
.
Summary of Contents for IP Network Camera
Page 1: ...Clare Controls IP Network Cameras User Guide Doc ID 2014 12 343 Rev 04...
Page 2: ......
Page 8: ...iv Clare Controls IP Network Camera User Guide...
Page 92: ......