52
Clare Controls IP Network Camera User Guide
Attached image:
Select the checkbox Attached Image if you want to send the
emails with attached alarm images.
Interval:
The interval refers to the time between the actions of sending attached
pictures.
Authentication
(optional): If your email server requires authentication, select this
checkbox to use authentication to log in to this server and enter the login user name
and password.
Receiver:
The name of the user to be notified.
Receiver’s address
: The email address of user to be notified.
4. Click
Save
.
Configuring snapshot settings
You can configure scheduled snapshots and event-triggered snapshots. The captured
images can be stored in the SD card, the netHDD, or uploaded into an FTP server.
To configure basic snapshot settings:
1. Enter the Snapshot Settings interface
Configuration > Camera Configuration > Storage > Snapshot
2. Select the
Enable Timing Snapshot
checkbox to enable continuous snapshots.
3. Select the
Enable Event-triggered Snapshot
checkbox to enable event-triggered
snapshots.
4. Select the quality of the snapshots.
5. Set the time interval between snapshots.
6. Click
Save
.
Uploading to FTP
Follow the instructions below to upload the snapshots to FTP.
To upload continuous snapshots to FTP:
1. Enter the FTP settings interface
Configuration > Camera Configuration > Storage > FTP
2. Configure the FTP settings, and then select the Upload Picture checkbox in the FTP
Settings interface.
3. Select the
Enable Timing Snapshot
checkbox.
Summary of Contents for IP Network Camera
Page 1: ...Clare Controls IP Network Cameras User Guide Doc ID 2014 12 343 Rev 04...
Page 2: ......
Page 8: ...iv Clare Controls IP Network Camera User Guide...
Page 92: ......