Clare Controls IP Network Camera User Guide
31
2. Select the
Enable
PPPoE
checkbox to enable this feature.
3. Enter
User Name
,
Password
, and
Confirm
the
password
for PPPoE access.
Note:
The User Name and Password is assigned by your ISP.
4. Click
Save
.
5. When prompted, reboot for the settings to take effect.
Configuring DDNS settings
If your camera is set to use PPPoE as its default network connection, you can use the
Dynamic DNS (DDNS) for network access.
Registration on the DDNS server is required before configuring the DDNS settings of
the camera.
To configure CVDDNS settings:
1. Enter the CVDDNS Settings interface.
Configuration > Camera Configuration >
Network > CVDDNS
2. Select the
Enable
CVDDNS
checkbox to enable this feature.
3. Select
CVDDNS Type
.
To configure CVDDNS:
1. Enter
Server Address
of CVDDNS (e.g. myclarevision.com).
2. In the
Domain
text field, enter the domain name obtained from the website.
3. Enter the
Port
of
CVDDNS
server.
4. Enter the
User Name
and
Password
registered on the CVDDNS website.
5. Click
Save
.
Summary of Contents for IP Network Camera
Page 1: ...Clare Controls IP Network Cameras User Guide Doc ID 2014 12 343 Rev 04...
Page 2: ......
Page 8: ...iv Clare Controls IP Network Camera User Guide...
Page 92: ......