Clare Controls IP Network Camera, User Manual, Page: 57 / 92

Clare Controls IP Network Camera User Guide 49
Set the alarm actions for motion detection.
You can specify the linkage method when an event occurs.
Figure 18: Linkage method selection
To set the alarm actions:
1. Select the checkbox for a linkage method. Audible warning, notify surveillance
center, send email, upload to FTP, and trigger channel are selectable.
Audible warning: This triggers the audible warning locally.
Notify surveillance center: This sends an exception or alarm signal to remote
management software when an event occurs.
Send email: This sends an email with the alarm information to users when an event
occurs.
Upload to FTP: This captures an image when the alarm is triggered and uploads
the picture to a FTP server.
Trigger channel: The video will be recorded when motion is detected. Set the
recording schedule to realize this function.
Trigger alarm output: This triggers one or more external alarm outputs when an
event occurs.
Configuring video tampering alarm
You can configure the camera to trigger the alarm and take the alarm response action
when the lens is covered.
To configure the video tampering alarm:
1. Enter the Video Tampering settings interface.
Configuration > Camera Configuration > Events > Video Tampering