Clare Controls IP Network Camera, User Manual, Page: 48 / 92

40 Clare Controls IP Network Camera User Guide
Configuring ROI encoding
ROI stands for the region of interest. ROI encoding lets you discriminate the ROI and
background information in comparison. This means that the technology assigns more
encoding resources to the region of interest to increase the quality of the ROI view.
Note: Only certain cameras support this function.
To configure ROI encoding:
1. Enter the ROI settings interface.
Configuration > Camera Configuration > Video/Audio > ROI
2. Draw the region of interest on the image. Up to four regions can be drawn.
3. Choose the stream type to set the ROI encoding.
4. Choose the ROI type.
Fixed region: Fixed region ROI is encoding for a manually configured area. You can
choose the Image Quality Enhancing level for ROI encoding, and name the ROI
area.
Dynamic tracking: Dynamic tracking ROI is defined by intelligent analysis, such as
human face detection. You can choose the Image Quality Enhancing level for the
ROI encoding.
5. Click Save .
Configuring image parameters
Image parameters cover display, OSD, text over-lay, privacy mask, and picture over-lay
settings.
Configuring display settings
You can set the image quality of the camera, including brightness, contrast, saturation,
hue, sharpness, etc.
Note:
The Display parameters vary depending on the camera model.
To configure display settings:
1. Enter the Display Settings interface.
Configuration > Camera Configuration > Image > Display Settings
2. Set the image parameters of the camera.