Clack Water Specialist EI, Programming And Cover Drawing Manual

Page: 4 / 24

Page 4 EI Man u al
Drawing No. Order No. Description Quantity
1 V3175EE-01 WS1EE FRONT COVER ASSEMBLY 1
2 V3107-01 WS1 MOTOR 1
3 V3002-A WS1 DRIVE BRACKET ASY 1
4 V3408EI-04BOARD WS1THRU2 EI PCBRD 5 DIGIT REPL 1
5 V3110 WS1 DRIVE REDUCING GEAR 12X36 3
6 V3109 WS1 DRIVE GEAR COVER 1
7 V3106-01 WS1 DRIVE BRACKET & SPRING CLIP 1
Not Shown
V3186-05 WS1 POWER SUPPLY US 15VDC VI
1
V3186EU-05 WS1 POWER SUPPLY EU 15VDC VI
V3186UK-05 WS1 POWER SUPPLY UK 15VDC VI
V3186-01 WS1 AC ADAPTER CORD ONLY
Not Shown V3178 WS1 DRIVE BACK PLATE 1
EI Front Cover and Drive Assembly
AC Adapter U.S. International
Supply Voltage 120V AC 230V AC
Supply Frequency 60 Hz 50 Hz
Output Voltage 15VDC 15VDC
Output Current 500 mA 500 mA
1
Battery replacement is 3 volt
lithium coin cell type 2032.
Correct
Battery
Orientation
Battery Fully Seated
When replacing the battery, align
positives and push down to fully seat.
Refer to Control Valve Service Manual for other drawings and part numbers.
2
Relay Speci fi cations: 12V DC Relay with a coil resistance not
less than 80 ohms. If mounting relay under the cover check for
proper mounting dimensions on the backplate.
Wiring for Correct On/Off Operation
PC Board Relay Terminal Block Relay
RLY 1 Coil -
+ COM Coil +
PC Board Relay
Terminal Block
4
5
6
7
3