SM-P00077-A/3
2. INSTALLATION
42
2020-04-15
2.5.3
EJ-type ("socket with cover" type) connector
Do not bend the lead wire beyond the dimension shown below.
2.5.4
DIN terminal box
◼
Disassembling the DIN terminal box
Loosen screw (1) and pull cover (2) in the
direction of screw (1) to remove the connector
from coil assembly (12).
Pull out screw (1) from cover (2).
Locate notch (9) (next to the GDSN mark) at the
bottom of terminal block (3). Insert a compact flat
blade screwdriver into notch (9) and pry to
remove terminal block (3) from cover (2) (refer to
the figure to the right). Do not apply excessive
force when removing terminal block (3) as this
may damage it.
Remove cable gland (4) and take out washer (5)
and rubber packing (6).
(1)
(2)
(6)
(5)
(4)
(7)
(10)
(8)
(12)
(9)
(3)
(11)
